ADAPT 360 | ADAPT 360 White
Bluetooth
®
headset
Using the headset
10
Using the headset
CAUTION
Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to permanent hearing defects.
X
Set the volume to a low level before putting on the headset.
X
Do not continuously expose yourself to high volumes.
Turning the headset on and connecting it
3x
2s
2x
X
Press the Power button for 2 seconds.
The headset turns on. The LED flashes blue shortly.
The headset automatically tries to connect to available
paired Bluetooth devices.
The LED flashes 2 times blue as soon as the headset finds
a device to connect to. The LED turns off.
If the LED flashes red, no paired device has been found.
i
The search function is deactivated while the audio cable is connected.
Turning the headset off
3x
2s
X
Press the Power button for 2 seconds.
The LED flashes red 3 times and turns off.
All volume settings are saved automatically when the
headset is turned off.
X
Charge the headset (see page 19).
OR
X
Store the headset (see page 20).
ADAPT 360 | ADAPT 360 White
Bluetooth
®
headset
Using the headset
11
Adjusting and wearing the headset
For good sound quality and best possible wearing comfort,
adjust the headset.
X
Put the headset on so that the headband runs over the
top of your head and the side with the R marking rests
on your right ear.
X
Adjust the headset so that
•
your ears are comfortably covered by the ear pads,
•
you feel even, gentle pressure around your ears,
•
a snug fit of the headband on the head is ensured.
Adjusting the volume
1
2
3
You can adjust three independent volume settings for the
headset:
1.
Call volume: during an active call
2.
Audio volume: during audio streaming
3.
Volume for ring tone, tones and voice prompts:
in idle mode – no active call or audio streaming
X
Press the Volume button to increase or decrease the
volume.
You hear a beep or double beep for maximum or
minimum volume.
Alternatively you can adjust the volume on your connected
device.
Adjusting the headset’s microphone volume for softphones
Softphone
x
Softphone
x
X
Initiate a call on your connected device to someone
who will help you find the correct volume setting for
your microphone.
X
Change the microphone volume in your softphone
application and/or in your PC audio application.