Epomaker GK68 Extended Manual
10/07/20
Lighting Section
This section was created for how to adjust the different lighting, create them and add them to
onboard memory. It will also teach you how to upload and download the lighting effects so you
can share them with your friends.
Creating an Lighting (.LE) Files
I am going to show you how to create a lighting file that you can use, share with other users.
You can use these lighting effects on either the onboard memory of your Epomaker, or by using
it in driver mode.
1. Launch the software with the keyboard connected in wired mode. The keyboard must
use the cable given, or a USB-C to USB-A cable. The USB-A connection gives the ability
for the driver to interface and detect the software. You can use a dongle to connect your
keyboard to a USB-C connection on a Mac.
2. Launch the software and select “LE Files”, this is the section for creating lighting files.
We will go back to the “Configuration” Section later when we want to apply the lighting.
3. Click the “+” Button to add a lighting effect to the LE File Management Module.
Version 1.2
26
