⑬
Voltage And Current Curve: Display the curve of selected slot battery.
The progress of the curve has an auto-scaling function. The yellow line is
the voltage curve and the red line is the current curve.
SETTINGS INTERFACE SPECIFICATION
Access multiple batteries and click the battery icon to switch curves. The
selected battery icon will turn red, and click the red battery icon again to
enter the settings interface. As the following figure shows:
①
Shot: Displays the current slot information (As pictured
above
)
②
Operating Mode: Three modes: Charge, Discharge and Capacity Test;
the default mode is “Charge” (As pictured above
)
③
Current: Four kinds of currents can be selected, 0.5A, 1A, 1.5A and
2.0A;Li-ion and LiFePO4’s default current is 1.0A; Ni-MH’s default current
is 0.5A. (As pictured above
)
④
Battery type: It will automatically identify Ni-MH and Li-ion batteries
when the batteries are in. When Li-ion batteries are detected, the Li-ion
