G
F
E
2) Insert the wooden dowels into C D E F G .
C
D
5) Locate panel A
and join to the assembly using 4 camlocks
D
C
A
1) Locate panels A C D . Insert camlock connector pins into the
threaded inserts.
3) Place panel D on soft surface and locate panel F . Attach each panel
so the finished edges are on the same side. Insert the pins into the
corresponding holes in panel F . Secure panels by inserting one
camlock into each of two corresponding holes on panel F . Turn each
camlock clockwise about 1/4 turn or until gap between panels is gone.
Do not over-tighten, it will damage the material.
D
F
EDGE BACK
FINISHED EDGES
4) Locate panel C and attach with camlocks.
Be sure the finished edges are on the same side.
C
D
F
Groove for
back panel
FINISHED EDGES
6) Attach panel E to panel A using two camlocks.
A
C
F
D
Groove for
back panel
A
C
F
D
E
29-Oct-2018
2/4
Have a question? Need a part ASAP? Call 1-800-589-7990 or email [email protected].
