6-Sept-2019
3/4
HAVE QUESTIONS OR CONCERNS? CALL US FIRST: 1-800-589-7990
COPYRIGHT © 2019 EPOCH DESIGN™ ALL RIGHTS RESERVED
Using the 12 machine screws provided,
attach the two steel center support brackets
(open end up) to the foot and head board.
5
Attach the drop support to the center
support by placing center support (
F
) into
the slot on the top of the drop foot (
G
).
Then insert two 60mm bolts into the
non-threaded side of the drop foot (
G
),
through the center support (
F
) and into
the threaded inserts. Tighten with the
Allen wrench provided. (Diagram
VII
)
*NOTE: To achieve tight corner joints, it may be necessary to pull
the corner joints together while tightening the leg bolts.
6
Lift the bed frame from the headboard end (
D
)
and insert the two legs (
E
) into the notched
alcoves in the headrail (
B
) and the side rails (
A
).
Loosely attach the legs (
E
) to the bed frame
by inserting two 15mm bolts through the
raised bracket arms on the legs on the inside
of the bed frame and finger tighten.
(Diagram
V
)
Then insert two 15mm bolts through the
bottom of the leg brackets and into the headrail
(
B
) and the side rails (
A
) and finger tighten.
(Diagram
V
)
4
Place the completed center support assembly
into the center support brackets, then tighten all
of the leg bolts with the Allen wrench provided.
4
E
E
B
B
D
A
A
A
V
E
VI
F
F
G
G
VII
F
G
