epoc Host2, Quick Start Manual

Page: 6 / 8

Step 3: Connect to the
epoc
Data Manager (EDM)
1. Configure EDM options
• Turn on the
epoc
Host
2
by pressing the power button.
• At the login screen, scan or enter the word
“ administrator ” into the User ID and Password
fields. (Set date and time if prompted)
To scan, aim the Barcode Scanner at the barcode and
press the
Scan Key.
• Select “ Tools ” then “ Options ”, then “ EDM
Options ” from the menu.
• Set “ EDM Present? ” to “ YES ”, and enter the correct EDM address and port number,
then tap the disk symbol.
2. Confirm EDM Connection
• Tap the “ Test EDM connection ” button to confirm a
successful EDM connection.
The
epoc
Host
2
is now ready for use.
NOTE: Refer to the
epoc
System Manual for instructions on updating the
epoc
Host
Software.
NOTE: Before placing this unit into service, consult your facility’s internal quality control
procedures and regulatory requirements.
6