page | 5
© 2017 Episode®
CONNECTING AND CALIBRATING
Proper Connections are important to the performance of any speaker within an
audio system.
Performing the following steps will ensure proper connections for optimum
speaker performance:
1.
At each speaker connection, ensure that the outer jacket is separated by at
least 2 inches.
2.
Strip t
he insulation on each conductor approximately ¼” and insert into the
speaker terminals.
• Ensure that there are no stray strands of wire protruding from the
connectors.
• Observe proper polarity (+ to + and – to – ) for each speaker and at the
amplifier).
3.
Turn on the home theater receiver and calibrate all speakers in the system
according to the receiver (or surround processor) manufacturer’s instructions.
Connecting to a SunBriteTV
Connect the sound bar to a SunBriteTV using the included 5 pin male connector
wire. Connect the wire ends as show in the diagram below.
L–
R–
L+
R+
Red Wire
(L+)
Black Wire
(L
–
)
White
Wire (R+)
Yellow
Wire (R
–
)
