Episode ES-500T Series, Owner'S Manual

Page: 5 / 12

pg.5
© 2013 Episode
ES-500T Series Soundbar Owner's Manual
Attaching the Feet
To ensure that the Soundbar will not slip when using the
kickstands, (2) rubber feet have been included. The feet
must be installed when using the kickstand. Place the feet
3” from the left and right outer edge, and ¼” from the front
edge of the Soundbar.
Note: When using the kickstand in the inverted position,
the feet should be placed at the front edge of the speaker
Adjusting the Kickstand
After installing the kickstand and placing the Soundbar, adjust the angle of the speakers towards the
listener’s ears. If the speakers point away from the listener’s ears, slide the kickstand up or down to achieve
the proper angle. Note that the kickstand can be inverted when the Soundbar is pointing down.
Considerations for Wall Mounting
To maintain a high level listening experience, the Soundbar should be as close to the TV as possible. Placing
To maintain a proper listening experience, the Soundbar should be as close to the TV as possible. Placing
the Soundbar more than 3" from the screen will separate the audio from the video and provide a poor viewing
and listening experience, keep this in mind when locating the Soundbar.
Mounting on a Wall
.25"
Front Edge
Non-Inverted
Kickstand
Inverted
Kickstand
8°
0° 11°
15°