pg.5
© 2012 Episode
ES-500-SNDBAR Installation and Users Manual
Attaching the Wall Bracket
Note: For ease of installation of the bracket and the Soundbar, we recommend that the TV be removed
from the mount. This allows for the Soundbar to be placed properly.
Before Installing the Mount
•
Locate and install the TV mount.
•
With the TV on the mount
·
Mark the position of the bottom of the TV.
·
Mark the position of the TV's Center Point.
•
Remove the TV from the mount
Installing the Mount 1.
1. Locate wall studs using a stud finder (not included).
2. Place the B racket on the wall with the flat side towards the wall and the holes for the
mounting slots facing up.
A. Position the 16” Stud Center (A) v groove over the wall studs aligning the
Soundbar Center (B) v groove with the center point of the TV.
Note: If wall studs cannot be used, a wall molly or anchor with the appropriate weight rating for
the Soundbar can be used.
B. Position the Bracket Vertical Center (C) v groove 2 ¼ ” from the bottom of the
TV. This will place the Soundbar flush with the bottom of the TV.
Tip: To allow for extra clearance, position the Bracket Vertical Center (C), 2 5/16” from the
bottom of the TV. This will provide an extra 1/16” clearance (recommended for Tilt
Mounts) allowing for the any tolerance differences that may occur.
3. Level the bracket and secure to the wall using the included screws.
16" Stud Center
Up
Soundbar Center
Bracket Vertical Center
A
B
A
C
Slide
Soundbar
4. Attach the supplied shoulder bolts to the inner bolt
locations on the rear of the Soundbar.
5. Place the Soundbar onto the wall bracket with the
rear screws in the slots. Slide the Soundbar onto the
bracket. Adjust for proper centering with the TV. Your
install is now complete.
