pg.5
© 2011 Episode
ES-300-SNDBAR Installation and Users Manual
Attaching the Wall Bracket
When mounting the bracket to the wall, place the flat side of the bracket towards the wall and verify that
it is level. There are small V- shaped notches on the top and bottom of the bracket; these marks are 16”
on center allowing for alignment with walls studs.
1. Locate wall studs using a stud finder (not included).
2. Position the provided Bracket on the wall with the V shaped notches over wall studs. If the
location does not allow for this, use a wall molly or anchor with the appropriate weight rating
for the Soundbar.
Note the orientation of the holes for the mounting slots as indicated in the leveling diagram.
3. Level the bracket and secure to the wall using the included screws.
16" Center (Studs)
Up
Soundbar Center
Slide
Soundbar
Installing on a Flatscreen Mount
The ES-300-SNDBAR can be mounted directly to a Flatscreen Mount with the Strong™ SM-BKT-
SBAR bracket (available separately). Using the Flatscreen mount bracket allows for the speaker
to move with the TV when mounted to articulating arm mounts. This provides an optimum listening
experience for these installations.
4. Attach the supplied shoulder bolts to the inner bolt locations on the rear of the Soundbar.
5. Place the Soundbar onto the wall bracket with the rear screws in the slots. Slide the Soundbar onto
the bracket.
Adjust for proper centering with HDTV. Your install is now complete.
