LiveScrypt User Guide
Install the power button shield
Label
Name
Description
HDMI output port
Connect an HDMI monitor or display device, see
for details.
RJ-45 Ethernet
Auto-sensing gigabit Ethernet 10/100/1000 Base-T network port, see
Connect the network and power on
.
SDI in
Connect up to 3G SDI signals for LiveScrypt to use the embedded
audio.
HDMI in
Connect HDMI and DVI signals (using an adapter) for LiveScrypt to
use the embedded audio.
RCA audio in
RCA consumer line-level mono audio pair, see
3.5 mm audio in
Stereo plug for mic-level passive or active stereo electret
microphones.
XLR/TRS combo jacks
Two mono XLR /TRS combo jacks.
l
Two XLR mic-level (balanced)
l
Two TRS ¼" professional line-level, +4 dBu
(balanced/unbalanced)
Phantom power light
Glows when 48 V phantom power is enabled. Phantom power is
applied to both XLR audio input ports when enabled, see
WARNING: Connecting devices that are not designed for
phantom power when phantom power is enabled for the two XLR
ports can seriously damage those devices. Always check the
phantom power LED before connecting devices to the XLR ports.
Install the power button shield
Optionally, you can install the supplied power button shield over the power button to prevent accidentally
turning the device off. Once applied, you cannot reposition the power button shield without damaging the
adhesive.
Before you begin, clean the area around the power button to remove any dirt or grease.
To install the power button shield:
12
