epiphan KVM2Ethernet, User Manual, Page: 129 / 188

7. Recording image files Configuring Image File Recording Options
User Guide Page 129
7. Recording image files
You can use the information in this chapter if you are planning to
record frames captured by a VGA2Ethernet device as a series of
individual image files.
This chapter describes:
•
Configuring Image File Recording Options
• Setting Display Options to Change How Image Files are
Recorded
• Recording Image Files
• Viewing Saved Image Files
Configuring Image File Recording
Options
You should review and modify image file recording options
before recording captured images as image files. Using image file
recording options, you can control the format of the image files,
control the file naming system used for saving the image files,
and determine whether to save all captured images or only some.
To configure image file recording options
1 Start the VGA2Ethernet user interface.
2 If required, select a VGA2Ethernet device using the Select
Device command from the Capture menu.
3 On the Tools menu select Options .
4 On the Recording tab set Record as to Images .
5 Configure the following options and select OK or Apply to
save your changes.