Standalone VGA Grid User Guide
Rename a source
Alternatively, to select an image you can simply drag and drop your chosen picture file to the blank
space below the Image field.
6. In the Timeout field, enter the number of seconds before the "No signal" image is displayed. If no
manual value is entered, the default time to display is 5 seconds.
7. Click
Apply
.
8. Test that the No Signal image is correctly applied by disconnecting your source and previewing the
channel(s) containing said source. See
Rename a source
Source names are used when adding sources to channels, therefore it is important that you know the name of
the source you wish to use. If a channel has only one source, the channel name will by default be the same as
its source name and will update automatically when the source name changes.
Sometimes it's helpful to configure the source name to match the data it's capturing so it's clear what the
channel is capturing too. Alternately you can change the channel's name. See
.
To change a source name:
1. Connect to the admin interface using your preferred connection mechanism. See
2. Login as admin.
132
