Standalone VGA Grid User Guide
Configure encoding
Delete an uploaded image
Images used in custom channel layouts are stored on the system hard drive. You can delete an image after
you are done using it, or to when performing general housekeeping duties on the system.
To delete an uploaded image:
1. Connect to the admin interface using your preferred connection mechanism. See
2. Login as admin.
If the image is used as part of the layout for any channel, select a different image or no
image by using the drop-down list in the
Picture settings
box within that channel's layout
before deleting the file using the steps below.
3. Click
Branding Content
under the Configuration menu; the configuration page opens.
4. Click
Remove
; a confirmation dialog box opens.
5. Click
OK
; the dialog box closes and the image file is removed from the configuration page.
Configure encoding
You can modify the encoding settings for each channel you create. These settings let you perfect your stream
by selecting the right frame size, bit rate, audio/video codecs and more.
This section covers the following encoding topics:
l
l
l
106
