Section 1: Safety
7
Safety Features and Regulatory
Compliance
Epilog has incorporated specific safety features into the Model 9000 Laser
System in order to meet the requirements of 21 CFR 1040 and the International
Standard IEC 60825-1. These safety features include:
A safety enclosure (cabinet), which fully encloses the engraving laser and
its beam path.
Dual redundant interlock systems that turn off the engraving laser when
the window is opened.
A visible emission indication when the Laser Diode Pointer (Red Dot
Pointer) is operating. There is an LED indicator on the machine’s front
panel.
21 CFR 1040 and IEC 60825-1 require that certification, identification, and
warning labels be placed on laser products. Reproductions of labels on the Epilog
Model 9000 Laser System follow, with their locations specified:
1.
Certification/Identification Label. This engraved plate is located on the rear
of the machine’s cabinet. The example shown is for the Model 9000/35
product having a 36 inch by 24 inch working area.
Model Number: 8000 Laser System
Serial Number: 9035-0400013624R
Date of Manufacture: March 2004
Mass:
35 kg max
Epilog Corporation
16371 Table Mountain Parkway
Golden, CO 80403 USA
Class 2 Laser Product
This product complies with 21 CFR 1040.10 and
1040.11 except for deviations pursuant to Laser
Notice No. 50, dated July 26, 2001.
This product complies with IEC 60825-1: 2001.
Consultants Europe bv
PO Box 5047
1380 GA Weesp
The Netherlands
Tel.: 31-294-483355
Fax.: 31-294-414687
E-Mail: [email protected]
Authorized Representative:
