Epifani UL 901, User Manual

Page: 4 / 8

1. Input Jack
Connect your instrument using a standard 1/4 inch
instrument cable.
2. Active/Passive Switch
Provides a 10 dB cut for active basses to avoid
unwanted distortion.
3. Gain
Controls the volume of the signal passing through the
EQ stage.
4.Bass
Active shelving EQ with 22 dB boost @ 40 Hz
5. Mid
Active bandpass EQ with 17 dB boost @ 450 Hz
6. Treble
Active shelving EQ with 22 dB boost @ 3 kHz or 6 kHz
7. Treble Shift
Sets the apex for the Treble control to 3 kHz if pushed
in, or 6 kHz if out.
8. Mid Cut Switch
Activates Mid Cut EQ. Green light is on when active.
9. Mid Cut Level
Provides up to 8 dB of cut @ 800 Hz. When engaged,
turning the knob all the way to the right (clockwise)
produces no cut. Turning the knob to the left
(counterclockwise) cuts high-mid frequencies.
10. Mute
Mutes the amplifier. Red light is on when engaged.
11. Master Volume
Controls the overall volume of the amplifier. Other
outputs including the DI, Tuner Out, and
Effects Send are not affected by the Master Volume
control.
Note: The Mute is automatically engaged when you
turn on the amplifier so you can set your Gain level
before sending sound through to the speakers.
Front Panel Rear Panel