4
Levelling the refrigerator
To do this adjust the two levelling feet at front of the unit.
If the unit is not level, the doors and magnetic seal
alignments will not be covered properly
•
Select a location without direct exposure to sunlight;
•
Select a location with enough space for the
refrigerator doors to open easily;
•
Select a location with level (or nearly level) flooring;
•
Allow su
ff
i
ci
ent space to install the refrigerator on a
flat surface;
•
Allow clearance to the right, left,
back and
top when
installing. This will help
reduce power
consumption
and keep your energy bills lower.
INSTALLATION
Space Requirement
Location
The appliances should be installed well away from sources
of heat such as radiators, boilers, direct sunlight etc. Ensure
that air can circulate freely around the back of the cabinet. To
ensure best performance, if the ap-pliance is positionned
below an overhanging wall unit, the minimum distance
between the top of the cabinet and the wall unit must be at
least 100 mm. Ideally, the appliances should not be positionned
below overhan-ging wall units. Accurate leveling is ensured by
one or more adjustable feet at the base of the cabinet.
WARNING!
It must be possible to disconnect the appliances from the
main power supply; the plug must therefore be easily accessible after
installation.
ERFF111BL
