13
o
Setting Up the Remote
The remote control comes with one (1) 3V lithium battery (CR2025).
Installation of battery in the remote control.
1.
Remove the battery compartment cover
by very gently sliding the cover in the direction of arrow (A).
Then very gently pull the cover in the direction of arrow (B).
2.
Insert the battery with the positive side facing up.
3.
Reinsert the battery unit.
Caution:
1. Use only a 3V lithium battery (CR2025).
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the battery when not using the PROJECTOR for prolonged periods.
Operating Range
The remote control uses infrared (IR) transmission to control the PROJECTOR.
It is not necessary to point the remote directly at the PROJECTOR. The remote control
functions properly within a radius of approximately 7 meters (23 feet) and 15 degrees
above or below the PROJECTOR level. It is most effective when held perpendicular to the
sides or in back of the PROJECTOR. If the PROJECTOR is unresponsive, the operator should
move closer towards the PROJECTOR.
