background image

23

 HOW TO TURN ON THE POWER

IMPORTANT: If the elliptical has been exposed to 
cold temperatures, allow it to warm to room tem-
perature before you turn on the power. If you do 
not do this, you may damage the console displays 
or other electrical components.

Plug in the power cord (see 
HOW TO PLUG IN THE 
POWER CORD on page 
19). Next, locate the 
power switch on the frame 
near the power cord. Press 
the power switch to the 
reset position.

The screen will then turn on and the console will be 
ready for use.

Note: When you turn on the power for the 

 rst 

time, the incline of the ramp may calibrate auto-
matically.

 The ramp will move upward and downward 

as it calibrates. When the ramp stops moving, the ramp 
is calibrated. 

IMPORTANT: If the ramp does not calibrate auto-
matically, see step 4 on page 31 and calibrate the 
ramp manually.

 HOW TO USE THE TOUCH SCREEN

The console features a tablet with a full-color touch 
screen. The following information will help you become 
familiar with the device’’s advanced technology: 

••  The console functions similarly to other tablets. You 

can slide or flick your finger against the screen to 
move certain images on the screen, such as the 
displays in a workout (see step 4 on page 25). 
However, you cannot zoom in and out by sliding your 
fingers on the screen. 

••  The screen is not pressure-sensitive. You do not 

need to press hard on the screen.

••  To type information into a text box, touch the text box 

to view the keyboard. To use numbers or other char-
acters on the keyboard, touch the ?123 button. To 
view more characters, touch the Alt button. Touch the 
Alt button again to return to the number keyboard. To 
return to the letter keyboard, touch the ABC button. 
To use a capital character, touch the button with an 
upward-facing arrow. To use multiple capital charac-
ters, touch the arrow button again. To return to the 
lowercase keyboard, touch the arrow button a third 
time. To clear the last character, touch the button 
with a backward-facing arrow and an X.

••  Use the buttons at the bottom of the screen to navi-

gate the console menus. Touch the back button to 
return to the previous screen. Touch the home button 
to return to the main menu. Touch the runner but-
ton to select the onboard workouts menu. Touch the 
globe button to select the Internet browser. Touch 
the gears button to select the settings menu. Touch 
the Login button to log in to iFit.

••  Use the buttons on the console to navigate the 

tablet. Press the Home button to access the tablet 
desktop. Press the Back button to return to the previ-
ous screen. Press the center button to access the 
settings main menu.

Reset 

Position

Summary of Contents for A35e Elliptical













































Reviews: