11
8. Raise the Frame (61) to the position shown.
Have a second person hold the Frame until
this step is completed.
Remove the 3/8" x 2 3/8" Bolt (7) and the 3/8"
Nut (8) from the Storage Latch (65). If there is
a tie through the bracket on the Frame (61),
remove it.
Align the upper end of the Storage Latch (65)
with the holes in the bracket on the Frame (61).
Attach the Storage Latch with the 3/8" x
2 3/8" Bolt (7) and the 3/8" Nut (8) that you just
removed.
Firmly tighten the 3/8" Nut.
Lower the Frame (61) as described on page 24.
8
7
65
61
9.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the
oor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see pages 26 and 27).
8
7. Identify the Left and Right Trays (107, 109).
Press the Left and Right Trays (107, 109) into
the console assembly (E).
107
7
E
109
Summary of Contents for A30t Treadmill
Page 5: ...5...
