Operating Instructions
Page 2 of 2
RFRA - RF Room Thermostat
10. To disconnect the RFRA thermostat from the RF1
receiver
9. To connect the RFRA thermostat to the RF1 receiver
EPH Controls Ireland
Sitecast Industrial Estate, Pouladuff,
Cork, T12 W665, Ireland
[email protected] www.ephcontrols.com
EPH Controls UK
Unit E4, Welland Business Park, Valley Way, Market Harborough,
Leicestershire, LE16 7PS, United Kingdom
[email protected] www.ephcontrols.co.uk
On the RF1 receiver
Press the reset button on the right side of the housing.
Within 2 seconds, press the connect button.
The RF1 receiver is now disconnected from the RFRA thermostat.
On the RFRA thermostat
Press the button on the bottom of the thermostat, the front housing will
detach from the baseplate.
Press the RESET button on the printed circuit board.
“NO” will flash on the screen.
Rotate the hand wheel clockwise until “YES” appears on the screen.
Press the hand wheel once to confirm the setting.
The thermostat is now disconnected from the receiver.
On the front of the RF1 receiver
Press the connect button. The “System On” green LED will begin to flash.
On the RFRA thermostat
Press the button on the bottom of the thermostat, the front housing
will detach from the baseplate.
Press the CODE button on the printed circuit board.
When r1 appears on the screen, press the hand wheel once.
The thermostat is now connected to the receiver.
20170216_A
W1077_RFR
A_OpI
ns_JW
