Epever IP1500-12-Plus(T), User Manual

Page: 9 / 36

6
1. Overview
IPower Plus is a new series of pure sine wave inverter which compatible
with the lithium battery system. This new inverter with the input surge
current suppression technology, which effectively prevents the damage of
surge current to lithium battery cell and BMS (Battery Management System).
Also, the smart voltage and current double closed-loop control algorism
bring the inverter a faster response and better resistance to load impact.
The internal of the inverter uses high quality and high power density of the
components to provide the stable, reliable, and sufficient power output for
long time use. The optional communication solution allows people to
monitor the operational status in real-time or change the parameters at any
place.
The equipment fits multiple areas where need DC to AC, such as solar AC
power system, vehicle system, RV power supply, security monitoring
system, emergency lighting system, field power system, household power
system, etc. The inverter with the EMC (Electro Magnetic Compatibility)
characteristic is also available for higher power quality required place.
Feature
：

The input and output adopt completely isolated design

Smart voltage and current double closed-loop control bring a faster
response and better reliability.

EMC characteristic which widely applied to higher quality requirement
power system.

Adoption of advanced SPWM technology and pure sine wave output

Input surge current suppression technology to support the lithium
battery system.

Resistance to load impact supports impact loads (Air conditioner,
Washing machine, Refrigerator, etc.)

High power density and High-quality components to ensure reliability.

Output power factor up to 1

Low loss of no-load and standby.

Low THD (Total Harmonic Distortion)