21
turn on the loads with higher startup current first, such as television,
then at last the loads work stably, turn on the loads with lower startup
current, such as an incandescent lamp.
⑷
If the fault indicator is red and the buzzer alarms when turn on the
inverter, please switch off the loads and inverter immediately. Refer to
chapter 7 Troubleshooting.
After troubleshooting, please follow the
above steps and operate again.
6.4Rotate the LCD
(1) Remove the screws with a screwdriver, then rotate the LCD 180
°
(2)Set the screws of the LCD with a screwdriver.
Summary of Contents for IP1500-12-Plus(T)
Page 1: ...1 Models IP1500 Plus IP2000 Plus IP3000 Plus PURE SINE WAVE INVERTER USER MANUAL...
Page 2: ......
Page 13: ...10 3 Designations of models...
Page 35: ......
