Safety instructions
LEAK
COMP
®
1C
www.leakcomp.de
13
of
34
2.2
Requirements for personnel
WARNING
Installation and work on the
LEAK
COMP
®
1C
may only be carried out
by qualified personnel.
Qualified personnel as defined by this instruction manual are electricians
who are familiar with the installation, assembly, startup and operation of the device,
with the hazards involved, and who, based on their technical training, are also familiar
with the relevant standards and provisions.
Repairs may only be carried out by authorised repair centres. Unauthorised tampering
can lead to property damage and will void the warranty provided by EPA GmbH.
2.3
Responsibility:
WARNING
Electronic devices are never fail-safe. The installer and/or operator of the machine or
system is responsible for ensuring that the system/machine is restored to a safe state if
the device fails or the residual current device is tripped.
The safety requirements for electrical controllers are set out in DIN EN 60204-1; VDE
0113-1 "Safety of machinery" in the section titled "Electrical equipment of machines".
These provisions ensure the safety of persons and machines as well as the
maintenance of the functional capability of the machine or system and must be
observed.
