BT SPEAKER / PROJECTOR ON/OFF
6
Electronic file link
www.eliteprojector.com/MGFU/manual
P r i n t e d i n T a i w a n
www.eliteprojector.com
FBZZ-MG1Z002-01
BT SPEAKER / PROJECTOR ON/OFF
BT SPEAKER / PROJECTOR ON/OFF
*Note:
Press the Bluetooth button / PJ button to turn off Bluetooth / projector before press power off switch.
Avoid press power off switch directly when projector / Bluetooth still on
18
19
7
7
*Note:
An audible tone sounds when the
Bluetooth
powers on/off,
or when the projector connects/disconnects to a device.
Press the Bluetooth button to activate this
feature.It’s blue LED lamp will flash when the
Bluetooth is in pairing mode. Check “MosicGO
TM
”
on your device to connect to MosicGO
TM
Bluetooth
. When device is connected successfully, the blue
LED lamp will light persistently.To turn off the
Bluetooth, press down and hold the BT button for
over 1 second.When both projector and Bluetooth
are ON, short pressing the Bluetooth button on
the remote control will switch audio source
between projector and Bluetooth.
Press the PJ button to turn the projector on and
the status LED indicator will light up. To turn off
the projector, press and hold the PJ button for
over 1 second. After seeing prompt message,
short press PJ button again to confirm. The
MosicGO
TM
logo will show briefly before the device
powers off.The status LED indicator light will be
flashing as the projector powers down.When
projector is ON, short pressing the PJ button on
the remote control will cycle through the following
brightness modes: MAX, ECO, and MIN.
1.
2.
