15
Steering
Steering
Steering
Steering
– Apply the control handle to the left or
right.
Braking
Braking
Braking
Braking
Emergency stop:
–Drawing
back
the
emergency
brake
switch (6).
All electrical functions are deactivated.
Automatic
Automatic
Automatic
Automatic braking
braking
braking
braking
When the control handle is released it
automatically sets itself to the upper
brake zone (B) and automatic braking
ensues.
Regenerative
Regenerative
Regenerative
Regenerative braking
braking
braking
braking
If the travel switch is set to "0", the truck
automatically
brakes
regeneratively.
When the speed below 1Km/h, the
brake then applies and motor brake
stop.
Inversion
Inversion
Inversion
Inversion braking
braking
braking
braking
You can set the travel switch (13) to
the opposite direction when travelling.
The truck brakes regeneratively until it
starts to move in the opposite direction.
Warning!
Warning!
Warning!
Warning!
If the control handle moves slowly or
not at all to the upper brake zone, the
truck must be taken out of service until
the cause of this fault is be rectified.
Replace the gas pressure spring if
necessary.
Warning!
Warning!
Warning!
Warning!
If the travel switch moves slowly or not
at all to 0, the truck must be taken out
of service until the cause of this fault is
be rectified.
Replace
the
control
handle
if
necessary.
Warning!
Warning!
Warning!
Warning!
In hazardous situations set the control
handle to the brake position or set the
travel switch (13) to the opposite
direction.
