ep CQD12R, Operation Manual

Page: 34 / 45

27
4.4 Charging the battery
• Expose the battery(See 4.3 Expose the battery ).
Safety regulations for Charging
• Please charge in the well-ventilated and
appointed site.
• Mark ‘no smoking’ on charging.
• ahead of charging
，
please examine wire and
pin whether good or not. When wire and pin are
damaged
，
please do not charge.
• When charging, the tops of the battery cells
must be exposed to provide sufficient
ventilation.
• In charging
，
electrical source switch or battery
pin are not close
，
or
，
which destroys pin and electrical units as a rule
，
first press the
stopping button on the charger
，
then unfix the pin.
It is essential to follow the safety regulations of the battery and charging station
manufacturers.
4.5 Battery removal and installation
• Expose the battery(See 4.3 Expose the battery ).
• Place the battery plug or the
battery cable in such a way
that they will not get caught on
the truck when the battery is
removed.
• The hooks(1) must be
attached to the eyes of the
battery in such a way.
• Lift the battery clear and
move out to the side.
• Installation is in the reverse
order of operations.
Warning! To prevent short circuits, batteries with exposed terminals or connectors
must be covered with a rubber mat. When replacing a battery with a crane, make sure
the crane has sufficient capacity (see battery weight on the battery data plate on the
container). The lifting gear must exert a vertical pull so that the battery container is not
compressed. Hooks must be fitted in such a way that when the crane lifting harness is
slackened, they do not fall onto the battery cells.