30
Removing
Removing
Removing
Removing the
the
the
the front
front
front
front panel
panel
panel
panel
Trucks with folding operator platform:
– Fold down the operator platform (4).
– Unlock the panel latches (2).
– Lift off the panel (3) and place it next
to the truck.
When the work is finished, closed the
panel (3).
Replacing
Replacing
Replacing
Replacing the
the
the
the drive
drive
drive
drive wheel
wheel
wheel
wheel
The drive wheel must only be replaced by authorised service personnel.
Checking
Checking
Checking
Checking the
the
the
the hydraulic
hydraulic
hydraulic
hydraulic oil
oil
oil
oil level
level
level
level
– Prepare the truck for maintenance and repairs (see section 6.1).
– Opening the front panel (see Section
6.3).
– Check hydraulic oil level in hydraulic
reservoir (2).
There are markings (1) on the hydraulic
reservoir. The oil level should lie between
the "max" and "min" markings when the
forks are lowered.
If necessary, add hydraulic oil of the
correct grade up to the "max" mark. (for
hydraulic oil specification, see Section 5).
Check
Check
Check
Check transmission
transmission
transmission
transmission oil
oil
oil
oil level
level
level
level
– Prepare the truck for maintenance and repairs (See 5.3.3 Maintenance Instructions
Page28).
– Remove the front panel .
– Turn the control handle to the right limited pisition.
– Check the transmission oil level, it should be at the control plug level (See 5.3.2
Lubrication Schedule Page27).
– If necessary add transmission oil of the
correct grade .
Installation is the reverse order.
Warning!
Warning!
Warning!
Warning!
Forbid adding transmission oil within
impurity.
