28
6.Troubleshooting
This chapter is designed to help the user identify and rectify basic faults or the results
of incorrect operation. When locating a fault, proceed in the order shown in the table.
Fault
Possible cause
Action
Truck does
not start.
•
Key switch in “OFF” position
•
Battery charge too low
•
Truck in charge mode
• Faulty fuse
•
Set key switch to “ON”
•
Check battery charge, charge
battery if Necessary
•
Interrupt charging
• Test fuses
Load can
not be
lifted
•
Hydraulic oil level too low
•
Excessive load
•
Check the hydraulic oil level
•
Note maximum capacity (see
data plate)
If the fault cannot be rectified after carrying out the remedial procedure, notify the
manufacturer’s service department ,as any further troubleshooting can only be
performed by specially trained and qualified service personnel.
