If you have any questions about the mounting process do not hesitate to
contact me at [email protected]
This kit is not for beginners, you should have soldering skills and
you must know in which direction to put ICs, LEDs & capacitors
Eowave bears no responsibility for mistakes that are made during the
assembly process, or for damage caused to components if they are not
soldered correctly. Read the instructions carefully before starting to
solder. Use the pictures to verify the placement if you have doubts.
Google ‘resistor calculator’ to work out resistor values from the col,our bands,
or better yet use a multimeter
Glue the caps on the switches (the best method is to use hot glue so you
don’t have to wait, otherwise you can use superglue)
Components will take place on 2 sides of the board, the components on one
side, the LEDs and mechanical parts on the other side as follows
Summary of Contents for DIY 8
Page 4: ...Component side ...
