15
EN
Note:
Use sauna stones with 50/80 mm size.
!
Make sure that the spade terminals of
the inner wiring are tightly fitted on the heat-
ing elements and the wire ends are tightened
in the screw connections!
4. Take off the terminal box cover (remove 6
screws).
5. Take off the upper cover panel (remove 2
screws).
6. The heating elements are mounted in the
upper side of the terminal box and secured
from below with M5 screws.
7. Pull off the inner wiring from the heating
element terminals and loosen the corre-
sponding M5 screw. Take the heating el-
ement out. Install the new element in the
reverse order and connect it.
5.
6.
4.
8. Mount the top coverl and the side cover of the terminal box back in original position and se-
cure them with the corresponding screws.
9. Set the heating element block back into the housing and secure it with mounting screws.
10. Set the decoration ring back on top and fill the stones into the rock store..
11. Connect the power supply cables.
7.
