25
GB
1
4
2
3
ca. 60
10
75 (60)
156 (141)
ca. 57
ca. 89
ca. 90 (75)
mind
. 190
11,5
Specifi cations
Nominal voltage: 400 V AC 3N 50 Hz
Power rating: 9,0 kW
Height: 800 mm
Width: 1160 mm,
Depth: 580 mm
Rock store volume: 75 kg
Leakage current: max. 0,75 mA per kW power
Intended use: sauna heater for use in domestic
and commercial sauna cabins.
Standard delivery:
1 sauna heater
1 metal funnel with silicone tube and connector
1 safety grill
1 polybag with 4 fl at-head screws
1 set of sauna rocks (appr. 75 kg)
The sauna heater is designed for use with 400V
3N AC 50Hz power supply and shall be operated
with the appropriate sauna control unit.
1. sauna heater
2. Water splash funnel with silicone hose
3. Adjutable feet
4. Safety grill
The minimal inner height of the sauna cabin
shall be 1,90 m.
The horizontal gap between the sauna heater
and the cabin wall must be at least 7 cm.
The distance between partition wall or sauna
bench or other flammable materials and the
sauna heater shall be as shown below on Fig. 1.
The supplied safety grill shall be mounted along
the top edge of the partition wall between this
partition wall and sauna wall (Fig. 1). This shall
prevent that an object may be accidentally
dropped on the sauna heater.
Contradictory to the advice concerning
the mounting of the temperature sensor of
your sauna control unit, the temperature
sensor shall not be mounted on the ceiling
above the sauna heater but, as shown in
the diagram (Fig. 1). See page 26 for more
details.
Minimal clearances
Installation example (side view)
safety grill
Funnel
Fig. 1
Dimensions in mm
temperature sensor
Intake
Invisio
Partition wall (non included)
