14
GB
Use the buttons
„ „
and
„ „
to set the
required value in 10 minutes steps.
Please consider that the cubicle must heat
up for around 40-50 minutes to achieve an
appropriate temperature. If, for example, you
want to start your sauna at 18.00 select the
preset time to 17.10.
Please confirm with a long press on the
„Mode“
button until the new value is fl ashing
on the display.
The
P1
program function is displayed on the
screen briefl y.
While P1
is displayed on the screen press
the button until the preset time icon fl as-
hes. This starts the preset mode.
Programming section
P1
Start with preset time
You can use the time pre-selection to start your sauna within the next 24 hours.
Always ensure that no objects are located on the sauna heater at the start of
the
heating process. Risk of fi re!
P 1
15:07
17:10
P 1
17:10
20:03
17:10
For the heating adjustment please press
„Mode“
button. In the display appears the
pre heating time symbol and
„P1“
.
Please confi rm with the
„Mode“
button.
After a short time the screen displays the
current time and preset heating time alter-
nately. The screen’s background lighting
goes out.
When the preset time is reached the sauna
equipment switches itself on. At the end of
the heating period the control unit automati-
cally switches the device off.
