
39
EN
jump to the next digit.
After the 4
th
digit confirmation the display will return to the start screen and the unit is now locked.
No settings are possible.
For safety reasons it is still possible to switch off the heater (interrupt active heating) and to switch
the light while the unit is locked. All other functions will be locked.
For all other operating attempts, the request for PIN code entry appears.
To unlock the unit press
,
in order to call the pin code prompt. Now give in your pin code.
The unit is now unlocked.
How to reset the pin code
Press any button (except “light“) to launch the pin code prompt, do not change the “zero” values,
confirm the first zero ( press
), then hold the button
pressed for the second zero (first two
zeros turn green, the cursor jumps to the third zero).
After approx. 40 seconds all four zeros will turn white. Now confirm all four zeros with the ENTER
button - upon exiting the unit will be unlocked.
Heating time
Here you can set the required heating time duration for your sauna heater.
For private use the max. heating time is limited to 6 hours. For commercial use the max. heating
time may be limited to 6 hours, 12 hours or set to unlimited. This limitation should be set in hard-
ware during the installation and setup (jumper 5 setting)
Press with the ENTER button on the
symbol and set the required heating time in hours and
minutes. This setting will then be valid for every manual sauna switching.
After switching the sauna on, the remaining heating time will be displayed as
a countdown clock in the upper left corner. So you can check at a glance the
remaining heating time of your sauna.
Please observe that after the humid mode operation (only EmoStyle Hi) the
sauna heater will be switched in the “sauna dry“ mode, in order to dry your
sauna cabin. The default sauna dry mode duration is 30 minutes. This time
may be reduced (also the pre-set temperature and fan operation time may
be adjusted) in the setup menu. Please contact your dealer for further details.
The heating time may be changed with 1 minute steps. The minimal heating time is 1 minute.
20:51
4:23:14