26
EN
Technical data
Voltage: 400 V 3N ~ 50 Hz
Power consumption: 6,0; 8,0; 9,0; 12,0 kW accor-
ding to model
Vaporicer: 1,5 kW
Hight: 1000 mm
Width: 1120 mm
Depth: 200 mm
Stray current: max. 0,75 mA per kW heating
capacity
Sauna oven for use in family sauna
With this sauna heater you can choose either
the usual Finnish sauna or the different ways of
using the warm air bath, the ciimatic bath, the
gentle steam bath or herbal bath.
* with cabins measuring up to 2 x 2 m
** with larger cabins
Enclosed in the supplier‘s pack:
1 sauna oven
3 supplier‘s packs
1 sauna stones unit separately in cloth bag
The sauna oven is intended for a connection
voltage of 400 V 3N ~ via a sauna controller.
The minimum height of the sauna cabin must
be 1.90 m on the inside.
When assembling the sauna oven, attention
must be paid to the fact that the vertical distance
between the upper edge of the oven and the
sauna roof must be at least 90 cm, and the hori-
zontal (lateral) distance between the oven and
the booth wall at least 7cm
The distance between the oven protective gril-
le and the sauna bench or other combustible
materials must be at least 2 cm from the oven.
The provided safety grate has to be installed abo-
ve the oven at the upper edge of the partition
to the rear wall. This is to take care, that ob-
jects do not fall onto the heater unintentionally.
Minimum clearances
Contradictory to the specifications concerning
the mounting of the sensor of your sauna control
unit, the heater sensor is not mounted centrically
above the sauna heater but, as shown in the
diagram.
Fig. 2
Dimensions in mm
Fig. 2a
Heater guard
Fig. 1
Fig. 1a
Fresh
air
heater sensor
190*
390**
200
min. 300
1030
870
170
70
1000
190*
390**
220
200
min. 300
1030
870
1000
170
730
70
200
70
200
heater sensor
Heater guard
Fresh
air