58
Installation Instructions - EmoTouch 3
Installing multiple cabins
EN
7.1.2 Configuration 2 – 1 steam room and 4 additional cabins
Operating mode – 1 steam room and max. sauna or IR cabins
In this configuration, one cabin is controlled with 1–4 steam genera-
tors. Additionally, 4 more cabins with sauna heaters or infrared emitters
can be controlled.
Regardless of the number of steam generators in the first cabin, the second
cabin must be connected to jack 3 on the control panel. Cabin address 5
must be programmed at the corresponding steam generator or relay box.
Additional cabins are connected and programmed as follows:
* Module = add-on modules, e.g. LSG-Sauna, LSG-IR, LSG-RB, etc.
See also the following figures:
Jacks – sauna cabin relay box,
Jacks – EmoTouch 3 circuit board,
Setting
Operation mode
1 Steam cabin
with up to 4
Steam generators
and optional
up to 4 additional
cabins
2 Steam cabins
each with up to
4 Steam genera-
tors
2 Steam cabins
each with up to
2 Steam genera-
tors and optional
up to 4 additional
cabins
01. June 2019
Default: up to 8
Cabins
08:44:40
Cabin
Steam generator/module*
Cabin address
EmoTouch 3 jack
Cabin 1
Steam generator 1
1
1
Required
Steam generator 2
2
1
Optional
Steam generator 3
3
2
Optional
Steam generator 4
4
2
Optional
Cabin 2
1 steam generator or module
5
3
Optional
Cabin 3
1 steam generator or module
6
3
Optional
Cabin 4
1 steam generator or module
7
4
Optional
Cabin 5
1 steam generator or module
8
4
Optional
