Eonon G1306, User Manual, Page: 12 / 46

10
Fig.3 Fig.4
Tapping on button to turn to next page shown as fig.3.
Please refer to the following sequential order to
Note:
1.The group-setting can be erased by press
finish the setting:
1. Touch on one of the 6 BLANK columns position on the screen;
2. Press one button on the SW control;
3. The relative information jumps out on the screen;
4. Touch one of the functions as the wanted function for the pointed button on SW control;
ing and holding the selected group.
2. If there is already a set item, press the corresponding button on the SW control
and the screen will display:
Exist key X .
3. Different buttons on the SW can be defined to the same function. The defined button
can be redefined after erasing the previous function.
SW control
To set 6 short-cut bottons for the steering wheel control.
The screen will display as fig.4 if there is no set for the system.
MUTE, PAUSE, and .
There are 10 buttons for selection in each item:
POWER, SRC, PREV, NEXT, VOL+,VOL-,
SW CONTROL OPERATION