Eonon E1095, User Manual, Page: 8 / 16

6 23
1. PWR Button
Press this button to power on. Press it shortly to switch audio source mode. At AUX IN
mode, press it longer to power off.
2. MUTE Button
Press this button to shut off sound, press again to resume volume.
3. EQ Button
Short press this button to select the preset equalizer playing mode:
FLAT
→
ROCK
→
CLASS
→
POP
4.
Press this button to release the panel.
5. MBP Button
Press this button can start MBP function, it can make you enjoy the comfortable sound
effects.
Press this button each time to select the position you need as follows;
MBP L
→
MBP R
→
MBP OFF
The best listening position mode will be shown on the display according to the above sheet.
6. BAND Button
At radio playing state, repeat press this button to select the band as following:
Fm1
→
FM2
→
FM3
→
AM1
→
Am2
7. DISP Button
In any state, click on this button to convert into the clock display state, and 5 seconds later,
it will automatically return to the current state.
In the clock display state, long press this button to enter the time setup mode and click on
the button again to move between hours and minutes. After that, by using the VOL+/-, you
can adjust the required time and then click on SEL button for confirmation.
8. DBAS Button
Press this button to execute DBAS function, you will enjoy the strongest bourdon effect.
REL Button
VCD BASIC OPERATION
Slot in VCD dsic, unit will play it automaticalll. If disc is in slot, press SOURCE button to
play.
SWITCH SYSTEM
In the VCD mode, press the BAND/P/N button on the remote control to select the preset
PAL, AUTO, NTSC TV systems.
Note: Press M5 (N/P) button on the host to execute the same function.
PREVIOUS/NEXT SONG
In VCD mode, press SEEK+/SEEK- to choose previous/next song.
Note: Press SEEK+ /SEEK- button on the nuit is the same.
SPEED FORWARD/BACKWARD
While playing, long press seek+ or seek- button to activate the fast forward of fast rewind
fundction. When the mode is activated, make selection in the following levels and orders:
NOTE: Long press SEEK+ /SEEK- button to execute the same unction.
SLOW PLAY
In VCD mode, press SLOW button to slow play. The level of slow playing is as follows.
Sequence is:
NTOE: It just can be worked by the remote control.
ZOOM IN/ZOOM OUT
Press ZOOM button on remote control to zoom in / zoom out the ipcture. The levels are
as follows:
NOTE:
1. This function can only be worked by the remote control.
2. Image which is zoomed in can be moved by up/dowm/left/right cursor to move.
3. Image which is zoomed out cannot be moved.
.
ZOOM IN 2 ZOOM IN 3 ZOOM IN 4 ZOOM IN1/2
ZOOM IN 1/3 ZOOM IN 1/4 ZOOM IN OFF
SLOW1/2 SLOW 1/3 SLOW 1/4 SLOW 1/5
SLOW 1/6 SLOW 1/7 PALY
FAST FORWARD x 2 FAST FORWARD x 4 FAST FORWARD x 8
FAST FORWARD x 16 FAST FORWARD x 20
FAST REWIND x 2 FAST REWIND x 4 FAST REWIND x 8
FAST REWIND x 16 FAST REWIND x 20