Panel illustration
SIMPLE TROUBLESHOO TING GUIDE
Problem
Cause
/
solution
No power
Check the fuse. Replace with the proper
value if necessary
Some errors occur in the LCD or no
function when pressing the button
Press the
RESET
button
Unable to receive stations
Check and make sure the antenna is
properly connected.
Poor effect on receiving
Antenna may not have proper length. Make
sure the antenna is fully exten ded. If broken
replace the antenna with a new one.
The broadcasting signal is too weak.
The antenna is poorly grounded. Check and
make sure the antenna is properly grounded
at its mounting location.
CD
s cannot bo loaded
A CD is loaded in the mechanism.
The stereo indicator" "is flashing
Tune in the frequency accurately
The broadcasting signal is too weak.
(Set to the MONO mode)
No picture
The video line from main unit to the TV is
not connected properly .
Picture distortion
Improper setting of the color system. Set the
color system to PAL or NTSC, according
to the connected television.
The CD is dirty or damaged.
Wrong region code
Under DVD mode ,press" " on
remote control pad twice, the press
arrow on remote control pad,
and press pad 0-6according to your region
For example, if disc region is 1, press
arrow and 1 on the remote control.
No
memory
on
radio
sation
Press the station for 3 seconds to
memorize preset station.
For example, if a user wants to
Preset radio frequency FM 88.10
On station 1, just simply press
station 1 for 3 seconds when
frequency is tuned at FM 88.10
Note
:
If
any
of
the
problem
persist
,
consult
your
nearest
service
dealer
.
Never
attempt
to
disassemble
the
unit
by
yourself
.
3
26
Tel button
Volume button
Mode button
Reset button
Touch screen
Angle button
Remote control sensor
Eject button
Power button
Seek button
USB port
Power
button
A. Under sleeping mode, press it to
turn the unit on, and the unit will
automatically select radio mode.
B. Under working mode, press it to
turn the unit off .
Reset
button
Operating the unit for the first time or
after replacing the car battery , you
must reset the unit. Press this button
with a pointed object (such as a
ballpoint pen) to set the unit to initial
status.
Note: When errors occur on the LCD
display ,you can also press RESET
button to clear the error, It will erase
the clock setting and some memorized
functions.
