Eonian Care EC-501, Instruction Booklet, Page: 11 / 15

[ CLEANING INSTRUCTIONS ]
Always clean the bottles and accessories before put them into the steriliser.
The milk or any nutritional waste in the bottles or accessories could damage the
device.
After each use, allow the device to cool down for approx. 10 minutes. Always pour
away remaining water from the heating base and wipe dry.
Do not use abrasive scouring pad to clean the steriliser.
Clean the filter cotton when dirty and change for a new one every 6 months.
[
DESCALING INSTRUCTIONS ]
When you use the steriliser, scale may build up on the heating element in the water
reservoir. The harder the water, the faster scale builds up. Descale the appliance
every one or two weeks to ensure that it works effectively.
Pour 40ml of white vinegar (5% acetic acid) mixed with 60ml of clean water into
the heating base.
Turn the sterilisation mode on and turn off the device before the water is dried.
Drain and rinse thoroughly. Wipe dry.