Quick Guide
▼ Time Mark
▼ Enable Flight Mode
▼ Wake Up
▼ Repeat Start
6> AccessKey
You could enable and apply
AccessKey (Device Password)
to data logger after connecting to logger
via App or during configuration, once applied, user will be required to provide correct AccessKey when
connecting to or programming data logger.
shows on LCD once AccessKey was enabled.
Protection level determines what actions user could take when connecting to an AccessKey protected
data logger through Bluetooth communication.
1 (Normal)
, AccessKey is not required when connecting to and downloading an AccessKey protected
logger, but AccessKey is required when performing further control actions like configuring, starting or
stopping logger.
2 (High)
, AccessKey is required when connecting to an AccessKey protected logger.
Press
button for 3 seconds to add a time stamped mark
.
Up to 9 marks available.
If device was set to
Repeat Start
during programming, then user could press
to start a new
recording again directly after recording stops, no need to program device again.
You could let Tempod Bluetooth logger enters into flight mode in occasions where radio-frequency
signal transmisstion is not allowed. Connect to Tempod bluetooth logger via TempSen Go App, and then
enable
Flight
mode in
Device Connected
page. Logger in flight mode will suspend Bluetooth signal
transmisstion, so it will not be found or connected by TempSen Go App, but recording continues. User
could have logger quit Flight Mode by turnning on Bluetooth on logger manually or wake logger up
remotely.
You could wake logger up from flight mode by using
Wake Up
function. Tap
Wake Up
at bottom bar
of
Devices
page on
TempSen Go
App, TempSen Go will automatically wake up
ALL
nearby TempSen
Bluetooth loggers in flight mode, loggers waken up will turn on Bluetooth service.
Press and hold
button for 3 seconds to manually stop recording, meanwhile
(stop)
flashing on LCD reminds you to keep current button action until
becomes static, recording stopped
successfully. You could also stop recording through
TempSen Go App
, tap
at bottom bar in
Device
Connected
page to stop recording.
5> Download Data (3 options)
4> Stop Recording
Connect Tempod
®
logger to USB port, logger begins to generate PDF report automatically, and it would
take couple of seconds to complete. The PDF report will be available in logger created removable
storage device "TempSenDisk". Please copy the PDF report and save it to your computer.
Connect to Tempod
®
bluetooth logger via TempSen Go App, and then tap
on bottom bar in
Device
Connected
page to download data from logger. Data downloaded will be saved in local database on
your smart phone, you could view all stored data files in
Data Files
pages, tap on title bar of App
screen to expand main menu, in which please tap
Data Files
to enter into
Data Files
page.
You could also download Tempod using TempCentre software, connect device to computer, open
TempCentre software, and then TempCentre starts searching USB data logger and then downloading
data automatically.
• Please
DO NOT
perform any "Save" or "Save as" actions within any PDF reader
software, otherwise content of PDF file will be reorganized by PDF reader and raw data
embedded in PDF file becomes unrecognizable.
• Please
DO NOT
remove Tempod from USB port while it's still in process of generating
PDF report.
▼ Protection Levels
• Please note logger with remaing battery of one bar (or lower) or in Stopped or Error
status could not enter into Flight mode.
• Please note logger in flight mode consumes more power than normal mode and
shorten battery life as result , so please
DO NOT
use flight mode frequently.
↑
Generating PDF
↑
Connecting to USB
▼ Download PDF Report
▼ Download Data via TempCentre
▼ Download Data via TempSen Go App
7> Other Actions
8> Flight Mode
• AccessKey will be automatically synced to cloud after user logged into TempSen Cloud
on TempSen Go App, and users in the same organization with permission of Share
AccessKey will receive AccessKey automatically when connecting to this logger.
• Please contact us by sending email to [email protected] if Accesskey was lost.
• Please note Wake Up function NOT applicable on all mobile devices.
shows on LCD after flight mode was enabled, meanwhile icon disappears.
Press and hold
button for 3 seconds to activate device and start recording.
Meanwhile
(go) flashing on LCD reminds you to keep current button action.
3> Start Recording
←
Start Delay
(12.5 days)
appears on downleft corner of LCD indicating recording begins.
LCD changes to time countdown if device was set to a start delay after
successful activation.
You could also start recording via
TempSen Go App
on your mobile device, tap
at bottom bar in
Device Connected
page to start recording.