INSTALLATION GUIDE
Figure 1.1
Figure 1.2
Figure 1.3
•
First, before installing a conference top, verify that
the table base is level. Please refer to the specific
table base instructions for your unit on how to
properly level the base. An Equilibrium table is
shown for reference.
•
Verify how many tight joints are on the conference
top. Standard tops 36”- 48”D have (4) tight joints
per seam, and 54” – 72”D tops have (6) tight joints
per seam.
•
Place the top on the base.
•
Install all of the tight joints lightly, without
tightening down on them.
•
The top may need to be adjusted back and forth to
be able to reach all of the tight joints.
•
Note: Do not attach tight joint fasteners with the
table top upside down and then flip the top onto
the base as the table seams may shift during
flipping.
2
