Multi-Piece Conference Top
Installation
Multi-Piece Conference Top Installation REV-A
Seam Leveling Guide
Page 1: ...Multi Piece Conference Top Installation Multi Piece Conference Top Installation REV A Seam Leveling Guide ...
Page 2: ... many tight joints are on the conference top Standard tops 36 48 D have 4 tight joints per seam and 54 72 D tops have 6 tight joints per seam Place the top on the base Install all of the tight joints lightly without tightening down on them The top may need to be adjusted back and forth to be able to reach all of the tight joints Note Do not attach tight joint fasteners with the table top upside do...
Page 3: ...seam Once the seam is in the correct position tighten down the tight joint closest to that edge of the table with a ratchet This step will require 2 people one to hold the table in place and one to tighten the tight joint connector Attach the conference top to the table base If the top has embedded braces verify that none of the screw heads interfere with the table base If some screw heads do inte...
