I N S T A L L A T I O N G U I D E
Secure the surface using the supplied #10
X 1” Truss Head Wood Screws.
Attach Formed Trough Panel to Beam Weldment
using #10-24 x 1/2” Phillips Head.
Note: DO NOT tighten. Component needs to slide
along slots of part.
Mid Leg option:
When Mid Legs are required, install the outer
most Trough Panels 1st. Next, install 1 of the inner
Trough Panels. Next install the magnetic Mid
Leg Trough Cover before installing the final inner
Trough Panels.
Note: DO NOT tighten. Component needs to slide
along slots of part.
F I G U R E 3 . 7
F I G U R E 3 . 8
F I G U R E 3 . 9
3 ) A S S E M B L Y :
2x
2x
