4
Call 1300 369 273
www.enware.com.au
WARNING:
• Enware water chillers are not suitable for outdoor use. The appliance must not be exposed
to rain.
• Stainless steel panel (non-powder coated) chillers are not designed or recommended for
use in corrosive environments such as enclosed chlorinated pool areas.
• Consideration must also be made at the time of installation to adverse environmental/
atmospheric conditions such as, but not limited to, dust, corrosion, or freezing. These
conditions may void the warranty.
• Do not operate this appliance at ambient temperatures below 0°C, as it may cause the
water inside the water chiller to freeze and damage internal components.
• The appliance is not suitable for installation in an area where a water jet could be used.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
CAUTION:
• Mains Power Electrical Components.
For the purpose of safety and hygiene, access to
the internal components of this appliance is restricted to persons having knowledge and
practical experience of the appliance.
• Ensure the electrical supply is turned off, before taking the front panel off to access internal
components.
• If the power supply cord is damaged, it must be replaced by the manufacturer, its service
agent or a qualified electrician in order to avoid a hazard.
• In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance
must not be supplied through an external switching device, such as a timer, or connected
to a circuit that is regularly switched on and off by the utility.
• Do not damage the refrigerant circuit. Care should be taken not to puncture refrigeration
system lines. Some lines contain gas under high pressure.
• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting process, other
than those recommended by the manufacturer.
• If freezing occurs, do not operate the appliance, until ambient temperatures is again above
0°C and frozen unit has completely thawed.
