10
Call 1300 369 273
www.enware.com.au
operating instructions
5 cm
0.5 sec
Wave quickly in front of sensor
(does not activate)
Place hand in front of sensor at
5cm for 0.5 sec
Hand too close to sensor
(does not activate)
Move hand in towards sensor and
pulling up
5 cm
0.5 sec
TO TURN ON
Place hand in front of sensor lens for half a second at a
distance of 5 cm. Move hand away. Water starts to flow.
TO TURN OFF
Place hand in front of sensor lens for half a second at a
distance of 5 cm. Move hand away. Water flow stops.
If tap is not turned OFF, it will automatically turn OFF
after 45 seconds*.
When hand is within sensor range, sensor responds with
a Red LED light in the sensor lens.
*Longer flow time settings are available at the time of ordering – contact Enware for more information.
