2
Call 1300 369 273
www.enware.com.au
Before proceeding with installation ensure all operating and dimensional specifications are suitable for the intended installation.
Ensure all supply lines are flushed thoroughly to remove debris prior to the installation of this product. Strainers are recommended if
debris is an ongoing problem. A pressure reduction valve may be required to comply with recommended maximum supply pressure.
Enware products must be installed in accordance with AS/NZS 3500 – Plumbing and Drainage, the Plumbing Code of Australia as well as
imposed Local and State / Territory Legislative requirements and the manufacturer’s instructions.
Enware tapware must be installed in accordance with the provisions of AS/NZS3500 and any
relevant local regulations. Installations not complying with AS/NZS3500 may void the product and
performance warranty provisions. The performance of Enware AS/NZS 3718 tapware, in many
cases, exceeds the plumbing system design requirements of the Plumbing Code of Australia and
AS/NZS 3500.
Inlet Connection
3/8"x18 NPSM Female (BUB290)
1/2" BSP Male (BUB290B)
Recommended Working Pressure
100- 500 kPa
Flow Rate
2 l/minute (adjustable)
Recommended Temperature Range
5-30 °C
Technical Information
35
3/8 x 18 NPSM
70
40
70
90
BUB290
65
40
90
70
70
22 HOLE
1/2" BSP
BUB290B
technical data
installation compliance
