3
.
SINKING THE POOL STOOL
3.1 Place the completely assembled Pool Stool near the edge of the pool.
3.2 You must be in the pool to sink the Pool Stool.
3.3 Grab the base of the Pool Stool and guide the Pool Stool into the pool.
3.4 Be careful when placing the Pool Stool into the water as the buoyancy can cause it to push up until all air is
released.
3.5 Completely submerge the Pool Stool under the water until all air has been displaced. It will take approximately
three minutes for this process.
Sit on the Pool Stool and enjoy.
4. RECHARGING THE LED LIGHT UNIT
4.1 The Pool Stool does not need to be removed in order to remove the light Unit.
4.2 Unscrew the top/seat (Part A) in a counterclockwise motion and place the top outside of the pool.
4.3 Remove the light unit (Part B) by rotating it in a slight counterclockwise motion.
4.4 Ensure the light unit is completely dry prior to recharging.
4.5 On the underside of the unit, remove the rubber plug and insert the charging adapter.
4.5 Plug the charger into the outlet and allow the unit to charge completely.
4.6 Refer to Instructions Section 2 for reassembly and placement.
5. REMOVING AND STORING THE POOL STOOL
5.1 Unscrew the top/seat (Part A) in a counter clockwise motion and place outside the pool.
5.2 Remove the light unit (Part B) by rotating it in a slight counterclockwise motion.
5.3 Carefully lift the base (Part E) out of the pool, with the bottle weight still in place.
5.4 Remove the bottle weight (Part D) from the base (Part E) by rotating in a counter clockwise motion.
5.5 Dry all components completely.
5.6 Reassemble the Pool Stool, see assembly instructions, and store in a dry place.
For questions or comments please go to
and fill out the contact form. Your
questions will be answered in 24 hours.