1 - Bars
2 - Hand grips
3 - Clamp
4 - Deck
5 - Wheel
6 - Fork
7 - Brake
8 - Grip tape
9 - Compression
10 - Headset
Required tools for assembly
5mm Allen key (included)
1
2
3
4
5
6
7
8
9
10
SCOOTER ASSEMBLY
(Ensure all wrapping and packing materials are taken off your scooter before you start)
Slide Handle bars onto the fork tube, ensure the fork and bars are lined
up before doing so.
Avoid twisting/turning the bars as you slide it down. Doing so may
loosen the compression.
Ensure both the bottom of the bars and the clamp are touching the top
of the headset.
When you are satisfied that your front wheel and your handle bars are
inline. Using your 5mm Allen Key, start tightening the bolts from the
bottom up. Do this by turning the Allen Key in a clockwise rotation.
Repeat this action until all 3 bolts are tightened securely.
Failure to tighten or install properly may result in loss of control and
injury. If you have trouble understanding these instructions seek
assistance of a qualified mechanic.
Page 4
KNOW YOUR SCOOTER
