D e a l i n g W i th A l a rm s a n d E m er g e n c i e s
17
Calling for
Help
The NT9010 has three pairs of emergency keys. Using these keys you can send an
immediate Fire, Auxiliary or Medical and Panic message to your central station.
IMPORTANT:
The Fire, Auxiliary or Medical, and Panic keys will NOT func-
tion unless they have been turned ON by the installer. If your installer has
turned these keys ON, and enabled audible feedback, holding down the
keys for two seconds will cause the keypad sounder to beep indicating that
the alarm input has been accepted and transmission to the central station
is underway.
From the NT9010 controller
Press both
keys for two seconds to send a Fire message, and to trigger a
fire alarm on the system.
Press both
keys for two seconds to send an Auxiliary message.
Press both
keys for two seconds to send a Panic message.
Press both
keys (if available) for two seconds to send a Medical message.
NOTE:
In the U.S.A., do not program the Aux keys for use in medical emer-
gencies as per UL requirements.